RPI Part #SCS001
CASSETTE SEAL
OEM Part #01-100028S
- Black silicone
- Includes cassette seal,
and (4) 1/8 OZ. Liquid Soap - in foil pouch (RPI Part #RPS287)
- See
“PM Tip” below
Fits: Cassette lid
Models: 2000
Series
PM Tip:Remove and lube Cassette Seal (RPI Part #SCC001) every
30 days. Replace Cassette Seal every 800 cycles and use (1) foil pouch of
liquid soap (RPI Part #RPS287) to lube seal. |
 |
|
RPI Part #RPS287
LIQUID SOAP
OEM
Part #N/A
- 4 per package
- Includes (4) 1/8 oz. foil pouch of
liquid soap
- See “PM Tip” for RPI Part #SCS001
For
Use: Use when replacing Cassette Seal (RPI Part #RPS287) |
 |
|
RPI Part #RPF363
PUSH-IN ELBOW
FITTING
OEM Part #01-100782S
- 1/8-18 NPTF; 1/4” O.D. tube
only
- Nickel plated brass
- Extended swivel elbow
- Includes
push-in elbow fitting and (1) package Threadlocker 545 (RPI Part #RPA369)
Fits: Solenoid valve, Port No. 1
Models:2000 & 5000
Series |
 |
|
RPI Part #SCF002
COMPRESSOR
FILTER
OEM Part #01-100207S
- 28 mm x 54 mm; 7.5 mm thickness
- Polyethylene/Poyurethane Foam
- 40 micron rating
Fits:
Compressor
Models:2000 Series |
 |
|
|
RPI Part #SCK008
SOLENOID VALVE
KIT
OEM Part #01-100557S
- Includes Compression Sleeve (RPI Part
#RPF215), Compression Nut (RPI Part #RPF219), Male Connector (RPI Part
#RPF227), Push-In-Elbow Fitting (RPI Part #SCF019), vent tube, and (5) Cable
Tie (RPI Part #RPT083)
Fits:Bracket assembly, exhaust tubing
Models: 2000 Series |
 |
|
RPI Part #SCK003
SOLENOID-PLUNGER
KIT
OEM Part #01-100998S
- Includes plunger, o-ring, spring-coil,
and shim
Fits: Solenoid valve
Models: 2000 & 5000
Series |
 |
|
RPI Part #RPT364
SPANNER NUT
OEM
Part #01-101628S
- I.D.: 29/64”; O.D.:3/4” hex; THK:
1/4”
- 303 stainless steel
- 18-8 stainless steel dowel pins
Fits: Solenoid valve plunger
Models:2000 & 5000
Series |
 |
|
RPI Part #SCC005
SOLENOID - COIL
OEM Part #01-104303S
- 1.26 L x .92 diameter; .45 thru hole
-
112V/60HZ; 110V/50HZ; 9 Watts
- 25” long; 22 AWG, Teflon®
wires
Fits: Solenoid valve
Models:2000 & 5000
Series |
 |
|
RPI Part #RPA369
THREADLOCKER 545
OEM Part #N/A
- 5 per package
- Material: Loctite® 545; .02
fl. oz per unit
- Temperature range of -65degF to 300degF
- Seals
operating pressures up to 10,000 PSI; For use on all pneumatic and hydraulic
fittings |
 |
|
|
