|
 Get Adobe Reader
- RPI is pleased to supply
you with more new parts for dental compressors.
New additions to our line of parts to fit a variety of
different brands of dental compressors include Pressure
Switches, Pressure Relief Valves, Unloader Valve, Safety
Valves, and Pressure Gauges. Plus, don't forget to click
here for your Free Dental Compressor PM Guide! (04/08)
- The Keypad
to fit IVAC/IMED Infusion Pumps for model Gemini PC1 is here! (04/08)
- RPI launches a new line
of parts to fit Castle/Getinge Bulk Sterilizers!
RPI is proud to offer a new line of Solenoid Valve Assemblies
and Solenoid Valve Repair Kits to fit Castle/Getinge
models: 3522, 3523, 3525, 3533, 3622, 3623 & 3633. (02/08)
- RPI is pleased to announce
the arrival of the Guide to Maintaining Tuttnauer Manual Sterilizers
(Models 1730/2340/2540/3870 M/MK & Valueklave
1730 MKV). This guide is a perfect resource for troubleshooting,
maintenance tips and exploded Views. (02/08)
- Now available, additional new
parts to fit Tuttnauer E Series!
RPI has extended their line of new parts to include the Air
Pump (115VAC), Air Pump (230VAC), Air Pump Repair Kit,
Solid State Relay (Pump), Solid State Relay (Heater),
Axial Fan, Clock Chip (With Battery), Fuse Holder, Air
Pump Fuse and Water Pump Fuse. (01/08)
- Featuring new parts to fit Tuttnauer
E Series! RPI offers
more new parts including the Solenoid Valve, Plunger
Valve Kit, Magnetic Coil, Wire Connector with Gasket,
Water Pump, Water Level Switch & Water
Fill Electrode. (12/07)
- New parts
to fit Pelton and Crane Spirit® delivery units! RPI is
pleased to offer more new parts to fit Pelton and Crane
Spirit® delivery
units - including water solenoid coils, water solenoid
repair kits, handpiece block connectors, handpiece
hanger assemblies, air and water valve stem. (12-07)
- Introducing
new parts to fit GE/Critikon Dinamap™ NIBP
Monitors! RPI has launched a new line of parts to fit
GE/Critikon Dinamap™ 8100 & 8100T Non-Invasive Blood Pressure
Monitors! New arrivals include the Front Panel Overlay,
Pump Assembly, Check Valve, Battery, Battery Cable, Calibration Plug,
Temperature Probe Connector, Quick Connect and Power Input Module.
(10/07)
- New parts to fit Gendex X-Ray Units
and GXP™ Film Processors!
RPI is pleased to introduce the arrival of three Power
Switches to fit Gendex X-Ray Units and more new parts
to fit Gendex Film Processors! Parts include the Drive
Motor, Agitator Motor, Heater, Sprocket, Helical Gear and Drive Gears.
(10/07)
- More parts to fit Tuttnauer
autoclaves! RPI upgraded its Safety
Valve Kits to include both fittings for easy plumbing.
The Kits are also available for 37 PSI and 40 PSI – It's your
choice! We now have the Door Gasket to fit models 3850/3870
E/EA/M, and the Hepa Filter and Water Reservoir/Filter
Cover that fit the EA, EKA & EZ series. (08-07)
- RPI introduces a new line of parts
to fit Gendex GXP™ Film
Processors. Now available – both the Inlet and Outlet Tubing
Kits with clear tubing so you can see solution flow inside.
Plus we have the Hinge Kit. (07-07)
- New parts to fit Pelton and
Crane Spirit® delivery units!
RPI is pleased to offer more new parts to fit Pelton
and Crane Spirit® delivery
units - including water solenoid coils, water solenoid
repair kits, handpiece block connectors, handpiece hanger assemblies,
air and water valve stem. (05-07)
- Introducting new
parts to fit Gendex GXP™ Film Processors!
RPI is pleased to announce the arrival of a whole new
line of parts to fit Gendex equipment. Parts include
Heater and Cooling Fans, Drive Belt, Push Button Switches & Switch
Cover, Motor Brush, Fuse Holder, Leveling Foot, and Gasket
Maker. (06/07)
- More parts to fit Tuttnauer
Sterilizers including Reservoir Cover
and Dipstick, Rubber Boot, Door Bellows Housing Bolt,
Tap for Door Bellows Housing, Water Reservoir Gasket
and Safety Valve (40 psi). (05/07)
- Condensation Coils to fit Tuttnauer
Sterilizers … RPI
has the one you need! Over the years, Tuttnauer has changed
the configuration of their reservoirs by reversing the coil. RPI
has you covered – we
offer all three styles! (05/07)
- New parts to fit
the Pelton & Crane Spirit® AC Delivery
System! RPI is pleased to introduce the following parts:
Anti-Siphon Valve Kit, Pressure Gauge, Check Valve, Insert
(Syringe), Quick Connects, Valve Stem and more. (03/07)
- More new parts to fit Air Shields•Hill-Rom•Drager Infant
Incubators. RPI has added more new parts to fit the infant incubators – including
two Micro Filters, and the Air Auxiliary Probe (Group 2). Also available
is a complete line of skin temperature probes, both the reusable
and disposable styles, gaskets, heaters, motor capacitor, knobs,
and more. (02/07)
- Introducing Air and Micro filters
to fit Ohio Medical•Ohmeda•GE
Infant Incubators. RPI is pleased to add a line of micro
filters to its line of skin temperature probes, heater,
and lamp to fit the infant incubators. (02/07)
- New Parts and Upgrades
to fit A-dec Utility Module and Regulators!
RPI is pleased to introduce the new CLEAR Filter Housing
to fit the Utility Module and Filter Regulators. Also,
the Valve Repair Kits for water and air regulator valves
now include the White and Black Valve Bodies! (01/07)
- New parts to fit Pelton & Crane Spirit® Delivery Systems!
RPI is pleased to introduce a new line that includes
the Foot Control Assembly, Foot Control Valve Block Assembly,
Handpiece Holders, and more. (12/06)
- Plastic and Metal Tubing Snakes
now available! Pull-push wire,
cable, tubing and fiber-optic bundles with ease in and
around tight spaces. Both snake tools are offered with
a variety of attachments that screw on to the tip of the snakes and
allow you to customize them for th requirements of each job. (11/06)
- More parts to fit Steris® System 1®. Includes General
Processing Tray, Membrane Panel, Pressure Transducer
and more. (10/06)
- Skin Temperature Probes to fit
Ohmeda and Air Shields•Hill-Rom•Drager
infant warmers and incubators. RPI now offers both reusable
and disposable probes, in addition to Reflective Probe Covers that
fit all Skin Temperature Probes. (04/06)
- Switches to fit Air Shields•Hill-Rom•Drager Stabilet™ models
are now available. RPI offers the Power Switch that fits
the 200, 2000A/B and 2200 and the Lamp Switch that fits the 200,
1250, 2000A/B/C as well as the replacement Power Switch Lens' and
Lamps for both switches. (04/06)
- Tools to Help Make Your Life Easier! Fuse Puller, Cable Tie Tool,
Terminal Crimp Tool, O-Ring Installation and Removal
Tools, L-Hex Wrench Sets (Metric and Inch), Metal Tubing
Bender and Cutter, and Double Ended Spanner Wrench. (02/06)
- Parts to fit Ohmeda Infant Warmers. Three new heating elements
and a lamp! (01/06)
- Parts to fit
Pelton & Crane Chairman Dental Chairs. Now available
- the Brake Repair Kit, PCB Assembly, Gear and Rack,
Auto Recline Actuator, Coiling Wire Assembly, and Lift Motor! (01/06)
- Valves, valves
and more valves to fit the Steris System 1. Plus RPI now offers
the Lid Assembly. (04/05)
- New Motor that
fits Clay Adams centrifuges. Look! It’s one motor
that fits all these models: Autocrit I, II & III and Micro-Hematocrit
I, II & III. (06/05)
- Field Service
Calibration Kit to check and adjust pressure and temperature on
the Midmark M9 & M11. Comprehensive
Kit includes Test Pressure Gauge, Trim Pot Tool, Max Register
Thermometer, High Temp Cable Ties, Tubing, Kwik Clamps, and
carrying case. (06/05)
- More New
Parts to fit Hill-Rom Stabilet Infant Warmer. New parts include
the Disposable Skin Surface Temperature Probe and Interconnect
Cable. (03/05).
- New Parts to fit Hill-Rom Stabilet
Infant Warmer. New parts include the Heating Element, Bassinet Bracket, Fast Pak Triac Assy and more! (02/05)
- New Parts to Fit
Air Techniques, Pelton & Crane,
and SciCan. Now available - Casette Seal 5000, Thermo Fuse,
Up Interonnect (PCB), and much more!! (02/05)
- The Water-Mizer™. A water saving
and tempering device for sterilization. Retrofit your existing
bulk sterilizers with the Water-Mizer kit
to realize tremendous water and cost savings. It's new from
RPI! (12/04)
- New Parts to Fit
Midmark•Ritter
Tables & Chairs. Return
Hose Kit, Power Hose Kit, and Locking Gas Cylinder. (11/04)
- New PCB's & Switches
to Fit Pelton & Crane.
Now available - Capacitors, A/C Power Switch, Limit Switch,
Roller Micro Switch, and Switch Back PCB Assembly. (11/04)
- For Dental
Light Reflectors - RPI is your best source. RPI offers "new" (not
re-coated) reflectors with Free Lens Splash Shield to fit
A-dec, Henry
Schein, Knight, Marus and Pelton & Crane lights. Plus Front Shields
to fit
Belmont lights. (11/04)
- New Parts to
fit Midmark M9 & M11 UltraClaves®!
PM Kits, Steam Trap Kit,
Steam Trap, Pulse Solenoids, Water Level Sensor Assembly,
and Vent Solenoid
Valve along with the Repair Kit and Coil. (09/04)
- New Parts to fit Tuttnauer! Multi-purpose Valve, Repair Kit, Micro
Switch, Timer, Control Thermostat, and Knobs. (09/04)
- New Parts
to fit Belmont & Healthco Dental
Lights. Shields, Wire Harnesses, Lamp, Power Switch, Rubber
Sheel and more - all in stock and ready to ship. (06/04)
- Capacitors & Switches to fit Pelton & Crane
Dental Chairs. Now available - Capacitors as well as Switches
(including the Traverse, Tilt, Lift, Roller Micro, and Micro and Correction
Limit) to fit the Chairman and Coachman models. (06/04)
- FREE Lens Splash Shield with Reflector
to fit A-dec Cascade and 6300 Dental Lights Plus More. The Reflector comes with a FREE Lens Splash
Shield! Also available are the Power Switch, Lamp Socket Assembly and
Lamp. (06/04)
- Inflatable Chamber Seals, Filter
and PM Kits to fit Steris System 1! The
seals and filter are back! The two new Major PM Kits are
new! (05/04)
- Dental Compressor Parts. We have the Coalescing Filter Assembly (both
the 5 oz. and 10 oz.), Intake Filters (air), Foam Inserts/Purge Filters,
Cooling Fans, and Compressor Oil. (11/03)
- Reflectors for Dental Lights to
fit as replacements for Pelton & Crane,
Knight, Marus and Henry Schein brands. Plus, RPI has the
GE brand light sockets. (11/03)
- Cylinders to fit A-dec Dental Chairs. Lift and Tilt Cylinders to fit
A-dec dental chairs are now available . (11/03)
- New Parts to fit
Steris® System 1 including the Sterilant Aspirator
Assembly, Filter Screen & O-ring Kit, Check Valve with O-rings,
Check Valve O-ring Kit, and S.S. Repair Kit (CK-8 Check Valve)
are now available. (09/03)
- Marquette ECG Analysis
Systems Parts. RPI is now your source for
Marquette ECG analysis systems including the CASE 12/15, MAC 12/15,
as well as the T1800/T1900 model Treadmills. Click
here to see the
special RPI website for these parts. (08/03)
- New Parts to fit A-dec Dental Delivery
Units. It's more good news if
you work on A-dec Dental Delivery Units. RPI has the Check Valve Cartridge,
Air Bleed Valve Cartridge, and the Water Valve to fit the Century Plus
Handpiece Control Block. Plus the Cup Fill Toggle Valve (both gray and
black) to fit dental chair systems. And there's more, the 2 Way Momentary
Toggle Valves (both the black and gray) are now available to fit dental
chair systems with water purge and air brake system. (07/03)
- New Parts to fit Tuttnauer Sterilizers including the Safety Valve Holder
kits, Wire Harness, Condensation Coil, Circuit Breakers and Drain Valve
Assembly. (05/03)
- New Parts to fit A-dec and other Dental
Delivery Units. To fit the Century II H.P. Control Block, RPI now
has both the black and gray knobs that are egonomically
friendly with a "soft touch".
To fit the Century Plus H.P. Control Block, RPI offers
both the red and clear gaskets as well as the diaphragm.
And finally, to fit most dental delivery systems, including the Century
II and Century Plus, RPI has the White Valve Body Repair Kit and the
Black Valve Body Repair Kit. (03/03)
- When Servicing Pelton & Crane
Sterilizers. Introducing eleven new
sterilizer PM kits exclusively from RPI. Don’t simply put in a
new gasket when you can replace the bellows, filter and other critical
PM parts all at the same time with the RPI Sterilizer PM Kits. What’s
more, the kits are less expensive than purchasing the parts
individually! (02/03)
- New Parts to fit Gomco Suction,
Rotary and Thermotic® Pumps including slides and oil wicks, disposable collection canisters
(both the 1100 ml and 2100 ml sizes), the Diaphragm Part Kit and vacuum
gauge that fit the 300 series, and an on-off switch. (11/02)
- Handpiece Control Block to fit the
A-dec® Century II® systems is now available from RPI. What's more, the RPI block has
a removable set screw for easy access to the stem. Also
available are the Master Control Block Kit, Water Cover
Valve Kit, Air Cover Valve Kit, Control Block Service Kit, and a new
Saliva Ejector Tip in the color of grey.
- New parts to fit Air Techniques Peri-Pro
film Processors including
a Thermo Fuse that fits all three of the processors.
- Eliminate the
drift in Pelton & Crane LFI & LF+ lights with the RPI Drift Kit - it's new and
it fits the RPI Arm Knuckle. (08/02)
- New Parts
to Fit Hill-Rom•Air Shields Infant Incubators, Warmers & Phototherapy
Lights (07/02)
- New Parts to fit Steris System 1 (06/02)
- Hose Kits to fit Midmark 100 Series
Tables and Hydraulic Fluid for
the Tables are New and Now Available. (02/02)
- More new parts to fit SciCan Statim Cassette
Autoclaves® Models 900, 2000 & 5000: Page
1 - Page 2 -
Page 3 - Page
4 - Page 5 (10/01)
- RPI Field Service Smart Kit(TM) -
the first ever kit that contains just about everything
need to service the SciCan Cassette Autoclaves® Models
900, 2000 & 5000. (10/01)
- Steam Sensor
Upgrade Kit to fit the Pelton & Crane Models Validator 8 and 10 (Manufactured prior to
March, 1988). (04/01)
- Cylinder Kits
to fit Midmark 100 Series Tables. (04/01)
- New Parts to fit SciCan Statim 900,
2000 & 5000. (04/01)
- New Parts to fit SciCan Autoclaves including the Cassette Seal, Keypad,
Leveler Leg, Solenoid Valve Kit, Push-in Elbow Fitting, Compressor Filter,
Solenoid-Plunger Kit, Fuses, Solenoid-Coil and many more! (12/00)
- New Parts to fit American Sterilizer
Eagle and Medallion Series Sterilizers - Repair Kits, Repair Kits and more Repair Kits plus the
Automatic Solenoid Valve and Pressure Transducer Kit to fit these sterilizers.
(12/00)
- New Parts to fit Pelton & Crane
Validator 8 and 10 including the Pressure Tube Kit, Micro Switch,
Female and Male Quick Connect Fittings, and Small Drain Tube Assembly
Kit. (12/00)
- New Parts to fit the Pelton & Crane
Validator Plus 8 and Plus 10 including Female and Male Quick Connect
Fittings, Large and Small Drain Tube Assemblies, Micro Switch, and
the Water Level Assembly. (12/00)
- New Parts to fit Pelton & Crane OCM, OCR & Sentry
Sterilizers.
The Flange Reinforcing Blocks (RPI Part #PCK205 & PCK206) are now
available to fit the Pelton & Crane OCM and OCR sterilizers. Good
news for the Sentry! RPI offers a newly redesigned heater
(RPI Part #PCH147) with an outer covering made from electogalvanized
sheet steel for better durability and wire leads with exact
positioning! (12/00)
- New Parts to fit Peri-Pro, Peri-Pro
II and Peri-Pro III Dental Film Processors! A steel stopper pin has been built into the RPI Shutter
Release Bar (RPI Part #ATB600) for better performance. The new Shutter
Release Bar is also in the Shutter Release Repair Kit (RPI Part #ATK628)
and the Main Transport Repair Kit (RPI Part #ATK629) (12/00)
- More New General Shop Aids including cable ties, threadlocker, balldriver,
power cords, and spanner nut. (12/00)
- New Parts to fit
Tuttnauer Models 1730, 2340, 2540 & 3870
- MDT/Ritter/Castle models: M7, M9,
M11 & Newer 7’s - introducing
the “Longer Lasting” Air Vent Bellows Assembly to fit the
Models: M7, M9, M11 & Newer 7’s (08/00)
- New Line of
Parts to Fit Air Techniques A/T 2000® Film Processors (04/00)
- New Parts to fit Midmark/Ritter
7 & M7 SpeedClave™. It's
a Better Idea! RPI offers a better alternative to replacing
the Fill-Vent Valve that fits the Midmark/Ritter 7 & M7 SpeedClave™ (04/00)
- New Parts to fit Midmark Models M9
and M11 Ultraclave - Including Those
Dam Gaskets that Everyone Wants! (04/00)
- New Parts to fit Air Shields Infant
Incubators - Right Angle Thermometer
and Newly Redesigned Gasket to Fit Air Shields Infant Incubators Now
Available! (04/00)
- RPI Sleeve Tools with 45 degree and
90 degree Angles for Ease of Use.
Finally a Sleeve Tool that makes sense! Introducing the RPI Sleeve Tools
with 45 degree and 90 degree angles for ease of use (04/00)
- Air Shields Infant Incubators New
Design for Better Performance! The
Gasket to fit the Air Shields Infant Incubators is now better than ever.
(01/00)
- New Parts to fit Midmark-Ritter
Sterilizers Models M7 & 7! (01/00)
- Innovative Parts to fit Pelton & Crane
Validator and Delta Autoclaves (11/99)
- Lots of Parts to fit the Air Techniques
Peri-Pro I & II and Now the Peri-Pro III!
- Introducing the First of Many Parts to fit the Air Techniques A/T2000. (10/99)
- More New Parts to Fit
Midmark M9 & M11 Ultraclave (08/99)
- Parts to fit IEC Spinette Centrifuge - Here they
are! (07/99)
- RPI Now Has Parts to Fit
Hamilton Bell Centrifuges VanGuard V-6000 and V-6500
- RPI Metering Valve to fit the Chemiclave® -
It's back with a new design and better performance - RPI Metering
Valve to Fit the Chemiclave® (04/99)
- It's Back with a
New Design and Better Performance - RPI Metering Valve to Fit the
Chemiclave® (04/99)
- New Parts to Fit M9 and
M11 UltraClave®
- New Parts to Fit Pelton & Crane Delta and Validator® 8,10,
Plus 8 and Plus 10 (03/99)
- New Parts for Dental Laboratory Equipment, including: (12/98)
- Ney - Porcelain Ovens
- Wells - Dental Motors
- Whip Mix - Vac-U-Vestor
- Ray Foster Dental Equipment - 10" and 12" Trimmer
- Ritter - Motors
- New Parts to fit Clay Adams Centrifuges, including: (11/98)
- Analytical
- Compact II
- Physician's Compact
- Sero-Fuge and Sero-Fuge II
- New Parts to fit Pelton & Crane
Magnaclave - Latching Relay and
Bi-Metallic Thermostat Switch to fit Pelton & Crane Magnaclave
(11/98)
|
