OEMs & Models > AUTOCLAVES AND STERILIZERS > AMSCO/STERIS® > Eagle 10 & 10 Plus > AMA274

AUTOCLAVES AND STERILIZERS
AMSCO/STERIS®
Eagle 10 & 10 Plus

RPI Part #AMA274
OEM Part #(OEM Part # Not Available)

FILL/VENT VALVE UPGRADE ASSEMBLY

• Replaces the discontinued valve (RPI Part #AMV170) with a new design allowing for ease of disassembly without having to remove them from the unit! See Notes below
• Includes: (2) Solenoid Valves (RPI Part #MIS042) assembled on a mounting bracket with all parts as shown.
• Also available: Solenoid Valve Repair Kit (RPI Part #MIK053), Double Ended Spanner Wrench (RPI Part #RPT501), and Fuse (1/2A, 250V) - 1/4 X 1-1/4 - Time Delay (RPI Part #RPF060)

Fits: Chassis
Model(s) This Part Fits: Click here for listing.

Part Description Updated: 2/3/2024

Notes: As you are aware, the original AMSCO configuration made access to the solenoid valves very difficult and in turn made rebuilding a long and frustrating task. The RPI Fill/Vent Upgrade Assembly includes a pre-assembled bank of two (Fill and Vent) Solenoid Valves (RPI Part #MIS042) fitted onto an easily installed mounting bracket complete with all fittings, simple installation instructions and everything needed to upgrade the sterilizer. This Upgrade Kit relocates the solenoid valves facing the rear of the sterilizer for ease of disassembly without removal. And with the use of our Double Ended Spanner Wrench (RPI Part #RPT501), future rebuilding of the solenoid valves is a snap using our Rebuild Kit (RPI Part #MIK053).